3rd Completed Commission: Family

Family
oil on canvas
24'' x 24"

Here is the third of four commissioned paintings headed to Chicago . The title or theme of this painting is, "family". I had come up with a number of ideas while contemplating this title, but it was Karen's suggestion of using shoes that finally made the cut. It was an inspired idea. The "fathers" shoe, in back, was issued to me at Lack land Air Force Base on November 17, 1972. They were part of my dress blues, and I still wear them today as my dress shoes.

Secrets of oil painting to make good painter

Technique is not the secret of paintings. It's not using tissues, toothbrushes, sponges, cotton swabs, palette knives, or razor blades along with your artist paint brushes. Nor is it regarding "put a little blue here." All of these have a place in our bag of drawing and painting actions ... but the real secret of picture making is composition.

Paintings have underlying principles that manage the elements of the picture in order to bring the eye of the viewer into and around the image in an interesting way and to organize the elements into a cohesive whole.

In a painting of a sky, mountain range and valley let's say you want the sky to control. You would make the sky ½ the height of the canvas (3/6ths).

To be sure, an understanding of technique, color theory, form, drawing, perspective and proportion need to be studied and developed but they should serve on an fundamental structure.

Composition is the secret of paintings.

Important Steps to Make Laminate Countertop on your house

Of course before you begin making any sort of countertop you should first consider what will support the counter. Most people use cabinetry of some sort for this reason though there have been those who have used open space beneath their countertops. It all finally comes down to a matter of taste but if you are using open space beneath your countertops you will want to be absolutely certain that you can support the weight when you make laminate countertop.

The first thing you will require to do is decide whether you are going to cover your existing countertop, you are going to create additional countertops, or you are going to do both. I vote for both if there is the slightest possibility of enough room to make additional countertop space and can think of very few women who would be opposed to that notion.

It is a good idea to cut the laminate a little bigger than you think you will need. This gives you the opportunity to trim the strips with a router for a straighter edge before adding the next part of laminate.

How can you make laminate countertop?

you are going to cover your existing countertop, you are going to create additional countertops, or you are going to do both for your house.

You are going to cover your existing countertops

You are going to create additional countertops for kitchen

other,ll tell you in comments..

create poll for website

Steps for building stages

Once the plans are drawn, the materials have been chosen, and your finance is arranged, the next steps in the building process are likely to be:

1. Finding a builder (and subcontractors if you are organizing the building project yourself).
2. Getting tenders and quotes.
3. Revising the budget, if required.
4. Making your choice of builder and subcontractors.
5. Signing the contracts.

General maintenance for windows and doors

Take special care not to damage the coating when cleaning coated or specialized glass – follow the manufacturer’s instructions.

Doors sticking or jamming: This could be due to dirt, lack of lubrication or misalignment. Clean the locks and lubricate with graphite powder. If the lock is uneven it will jam. If essential, re-align the door.

Loose glazing rubber: Age and exposure to sunlight will get smaller glazing rubber causing it to pull out at the corners or shrink back leaving gaps.

Corroded hinges: This is caused by salt spray, lack of cleaning, or the incorrect type of metal being used. Clean and oil the hinge.

Water damage: Water damage around windows can be caused by compression or leaks. Try to reduce the quantity of condensation in your home.

Guidelines for using a ladder when painting your house

-Make sure your ladder is in good state before use. Look for loose or damaged rungs, damaged rails and missing or worn non-slip feet. If the ladder is damaged, get it repair or replaced.

-Make sure the ladder is sitting on a level base, putting a ladder on uneven floor can cause it to topple under your weight.

-If the ground is soft utilize a baseboard or sheet of plywood under the ladder footing.

-Prop the ladder at the correct angle - one meter out for every four meters up.

-Use a long enough ladder for the task – ladders must extend 1m past the structure being climbed.

-Place the ladder at a point where the roofline or other structure is closest to the floor.

-Check there is somewhere to tie the top of the ladder near where it is resting. If there isn’t, relocate the ladder before going up.

-Have the ladder steadied by another person until the top can be anchor or tied. This person must secure the base of the ladder with their feet and hold the ladder with both hands.

-It’s a good idea to have a piece of strong cord permanently looped around the top rung to tie it off. Synthetic cord between 4-8mm is ideal.

-Don’t hold tools in your hands as you go up the ladder. Use a tool belt or backpack for larger objects. Heavy items should be pulled up with a rope.

-Make sure there are no electrical wires that might pose a threat of electrocution.

Noisy water pipes and its types

There are three general types of noise water pipes can make:

• Whistling: Due to water passing through pipes speedily or through taps that are too small. Tight bends in pipe direction might be the culprit. If practical, straighten the pipes out, or obtain a plumber to fit a pressure-limiting valve.
• Chattering: Caused by movable pipes or worn tap washers. Clip the pipes strongly or replace the tap jumper and washer.
• Hammering: Caused by water traveling at high speed through pipes then coming to a sudden stop as the tap or appliance is turned off. Copper or other rigid piping is mainly prone to hammering. Persistent hammering is possible to cause additional wear and tear on the pipes and joints. Hammer arresters can be fitted to reduce this trouble.